How To Change The Resistance Of An Electronic Cigarette?

When the resistance of an electronic cigarette is used , it must be replaced to avoid several inconveniences including the alteration of the restitution of flavors, a drop in the volume of vapor and very often the risk of leakage. Here is some information that will allow you to replace the resistance of your electronic cigarette.

How you can visualize it on the electronic cigarette guide , the structure of an electronic cigarette consists of many elements including a resistance, which is used to heat the e-liquid to vaporize it. Depending on the electronic cigarette models, this resistance is screwed either on the lower part of the tank called the base, or on the upper part of the tank, namely the cap.

Here are the different steps to change your resistance depending on the location of your resistance.

• If the resistance is screwed on the upper part :

– If necessary, remove the mouthpiece

– Unscrew the upper part of the tank then remove the assembly

– Remove the resistance from its support by unscrewing it counterclockwise

– Before installing the new resistance, pour 4 to 5 drops of e-liquid on the coil cotton (be careful, the number of drops may vary depending on the models of electronic cigarettes and coils)

– Screw the new coil

– Screw the upper part on the tank and tighten until end. It is advisable to wait a few minutes before starting to vape, until the cotton is well soaked in e-liquid.

• If the resistance is screwed on the lower part :

– Turn over the clearomiser, mouthpiece down

– Unscrew the base on which the resistor is installed

– Remove the resistor from its base by unscrewing it counter-clockwise

– Before installing the new resistor, pour 4 to 5 drops of e-liquid on the coil cotton (be careful, the number of drops may vary depending on the models of electronic cigarettes and coils)

– Screw the new coil onto the base

– Screw the base onto the tank and tighten until the end. It is advisable to wait a few minutes before starting to vape, until the cotton is well soaked in e-liquid.

Each model of electronic cigarette having its specificities, we recommend that you scrupulously follow the instructions for changing the resistance in the instructions for use of your electronic cigarette.